Samsung HM320JI HM320JI / LI 전단

제품 코드
HM320JI / LI
다운로드
페이지 1
Mobile SATA
Spinpoint M6
320GB
250GB
Model
8 MB
HM320JI
HM251JI
FEATURES
• Max. 160GB formatted capacity per disk
• ATA Security Mode Feature Set
• SATA Native Command Queuing Feature
• ATA S.M.A.R.T.  Feature Set
• TuMR/PMR head with FOD technology
• SilentSeek™ 
• Serial ATA 1.5Gbps Interface Support
• NoiseGuard™
• Load/Unload Head Technology
Capacity
1
250GB/320GB
Temperature
Interface
SATA 1.5Gbps
 Operating
5 ~ 55 ℃
Buffer DRAM Size
2
8 MB
 Non-operating
-40 ~ 70 ℃
Byte per Sector
512
Humidity (non-condensing)
Rotational Speed
5,400 RPM
 Operating
5 ~ 90 %
 Non-operating
5 ~ 95 %
Linear Shock (1/2 sine pulse)
Average Seek time (typical)
12 ms
Operating(2ms)
5
325 G
Data Transfer Rate
 Non-operating(1ms)
1000 G
 Media to/from Buffer (Max.)
826Mbits/s
Vibration 
 Buffer to/from Host (Max.)
150MB/s
 Operating(Random,10~500Hz)
0.7Grms
Drive Ready Time (typical)
3
4 sec
Altitude (relative to sea level)
 Operating
-300 to 3000 m
 RELIABILITY SPECIFICATIONS
 Non-operating
-400 to 15000 m
Non-recoverable Read Error
1 sector in 10
14
bits
Controlled Ramp Load/Unload
600,000
 PHYSICAL DIMENSION
 ACOUSTICS
Height
9.5 mm
Idle (typical)
2.4 Bel
Width
69.85 mm
Performance Seek (typical)
2.6 Bel
Length
 100 mm
Weight 
102 g
 POWER REQUIREMENTS
Voltage
+5V±5%
* Note : Design and specifications are subject to change without prior notice.
Spin-up Current (Max.)
900 mA
1.1MB = 1,000,000 Bytes, 1GB = 1,000,000,000 Bytes
Seek (typical)
4
2.2 W
   Accessible capacity may vary as some OS uses binary numbering system
Read/Write (typical)
2.0 W
   for reported capacity
Low Power Idle (typical)
0.6 W
2  A small portion of the 8MB buffer memory is reserved for firmware use 
Standby (typical)
0.25 W
3  Power-On to Drive Ready
Sleep (typical)
0.2 W
4  30% duty cycle, random seek
5. On Track Read Operation
6  Power requirements based on enabled DIPM & 1.5Gbps speed
2.5" HDD product specification Rev 1.2
Match with product manual Rev 02
Capacity
 DRIVE CONFIGURATION
 ENVIRONMENTAL SPECIFICATIONS
 PERFORMANCE SPECIFICATIONS