West Elm Wall Mount Pendant 조립 방법
Important Safety Instructions:
·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fit securely into your outlet, do not force it-contact a professional electrician. Use the plug with
an extension cord only if it can be fully inserted into the cord's socket. Never alter the plug in any way.
·These instructions are provided for your safety. It is important that they are read carefully and completely
before assembling fixture.
·This fixture has been rated for up to
(1) 100-watt maximum type A bulb (not included)
. To avoid the
risk of fire, do not exceed the recommended wattage.
assembly instructions
05/08
page 1 of 1
Warning:
·To reduce the risk of fire, electrical shock or personal injury, always turn off
and unplug lamp and allow it to cool prior to replacing light bulb.
·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
·Keep flammable materials away from lit bulb.
Pre-assembly:
·Remove all parts and hardware from box along with any plastic protective packaging.
·Do not discard any contents until after assembly is complete to avoid accidentally discarding small
parts or hardware.
Care instructions:
·Clean with soft, dry cloth.
·Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the lamp.
Assembly Instructions:
1. Screw the drywall anchor (B) onto the wall.
2. Fasten the canopy plate (A) to the wall by screwing the plate screw (H) into the drywall anchor (B).
3. Secure the canopy (D) to the canopy plate (A) with the canopy screw (C).
4. Place the shade (F) onto the socket (E).
5. Turn the socket screw (G) onto the socket.
6. Screw the bulb onto the socket.
Wall Mount Pendant
Parts enclosed:
(1) Canopy plate (A)
(1) Canopy (D)
(1) Socket (E)
(1) Socket Screw (G)
(1) Shade (F)
Hardware Included:
(2) Drywall anchors (B)
(2) Canopy screws (C)
(1) Plate screw (H)
A
B
D
E
C
A
H
C
D
E
F
G
B
drywall anchor 2x
canopy screw 2x
plate screw 2x
B
C
H