Weber 38008 사용자 설명서

13.

Remove the Crossover

tube.

14.

Pull the selected burner(s) tube(s) from manifold frame and replace
with a new burner tube.

15.

To reinstall the manifold assembly, reverse steps 7 through 14.

CAUTION: The burner openings (1) must be positioned

properly over the valve orifi ces (2).

Check proper assembly before fastening manifold in place.

WARNING: After reinstalling the gas lines, they should

be leak checked with a soap and water solution before
using the grill. (See, “Check for gas leaks.”)

(2)

(1)

MAINTENANCE

(1 )

(2 )

CROSSOVER

IGNITION SYSTEM OPERATIONS

If the Crossover

ignition system fails to ignite the LEFT burner in a burner

set, light the LEFT burner with a match. If the LEFT burner lights with a
match, then check the Crossover

ignition system.

•

Check that both ignition wires(1,2) are attached properly.

•

Check that the Crossover

ignition button is activating.

•

You should hear the igniter sparking.

If the Crossover

ignition system still fails to light, contact the Customer

Service Representative in your area using the contact information on our
web site. Log onto www.weber.com

REPLACE IGNITER BATTERIES

Parts required: 1 AA alkaline battery per igniter.

Unscrew igniter button from bottom of control panel. Remove igniter button
and contact spring. Remove old battery and replace with a new AA alkaline
battery. Positive end(1) of battery faces up as shown in illustration. Replace
spring contact(2) and screw igniter button(3) back down.