Viper 3105V 사용자 매뉴얼

© 2012 Directed. All rights Reserved.

1

Vehicle Security System
Models 3105 and 3305

Guide Translations

For a Spanish or French version of the Installation Guide, please download it 
from www.directechs.com under “Resources”.

Traducción de los manuales:
Para obtener una versión en Español o Francés del Manual de Instalación, 
descárguela de www.directechs.com bajo el título “Recursos” (“Resources”).

Traduction du guide:
Pour une version française ou espagnole du guide d’installation, veuillez le 
télécharger à www.directechs.com sous «Resources».

Sensor adjustment 

detail

Optional Sensor Port

White 4 Pin Plug

LED Port

White 2 Pin Plug

Vatet Switch Port

Blue 2 Pin Plug

Antenna

Port

(-)

(+)

Red/White (-) 200mA Chan 2 Output

Green (-) Lock, (+) Unlock Output

Blue (-) Unlock, (+) Lock Output

Light Flash Jumper

Red (+) 12V Constant Power
Brown (+) Siren Output
Yellow (+) Ignition Input
Black (-) Chassis Ground
Violet (+) Door Trigger Input
Blue (-) Instant Trigger Input
Green (-) Door Trigger Input
Black/White (-) Domelight Sprvsn Output
White/Blue (-) 200mA Chan 3 Output
White (+/-) Light Flash Output
Orange (-) 500mA GWA Output

Channel 2 Output: Connect to the 
vehicle negative (-) trunk release re-
lay or other low current device

12V Constant Power: Remove the 
inline fuse before connecting to a 
wire that has (+) 12V at all times

Siren Output: Connect to the (+) 
wire on the siren

Ignition Input: Connect to a wire 
that has (+) 12V while the key is in 
the run and crank positions

Chassis Ground: Connect to a 
scraped (bare) metal surface in the 
driver kick

Door Trigger Input: Connect to a 
wrie that goes to (+) 12V when any 
door is opened

Instant Trigger Input: Connect to a 
wire that goes to ground (-) when 
the hood or trunk are opened

Door Trigger Input: Connect to a 
wire that goes to (-) ground when 
any door is opened

Domelight Supervision Output: 
Connect to a (-) wire that will turn on 
the domelight 

Channel 3 Output: Connect to an 
auxiliary relay or low current device

Light Flash Output: Connect to the 
vehicle parking light wire. This wire 
is programmable + or -

Ground When Armed Output: 
Connect to a starter interrupt relay 
or other accessory that requires a 
GWA

Important: NEVER connect 200mA low current outputs 
directly to a motor or high current device WITHOUT a 
relay,

Programming Port: The 998T Bit-
writer can be connected to this port 
for programming feature options. 
SmartStart can be connected to this 
port to operate the system by Smart-
phone.

Adjusting the shock sensor pot:   
1.  Securely mount the CPU (in a 

safe location) before adjusting 

2.  Turn the sensor adjustment 

clockwise to increase sensitiv-
ity, turn counterclockwise to 
decrease sensitivity

(-) Lock, (+) Unlock Output: Con-
nect to a wire that pulses ground to 
activate the vehicle lock relay or to 
a wire that pulses (+) 12V to acti-
vate the vehicle unlock relay

(-) Unlock, (+) Lock Output: Con-
nect to a wire that pulses (-) ground 
to activate the vehicle unlock relay 
or to a wire that pulses (+) 12V to 
activate the vehicle lock relay

Bitwriters with a date code of 6a or older require an IC 
upgrade (p/n 998M). Some bitwriters with a date code 
of 6B do not require the IC upgrade, refer to tech tip # 
1112 for more information. 

The Bitwriter® (p/n 998U) 
requires chip version 2.4 or 
newer to program this unit.

Remote control configuration

4- button remote control configuration

Feature

Description

Arm: Lock the doors and arm the vehicle

Disarm: Unlock the doors and disarm the vehicle

Channel 2/Silent Mode: Activate Silent Mode and 
Auxiliary functions

Panic

 and 

Channel 3: Press together to control an Auxiliary out-
put

More information and full Installa-
tion Guide can be found online at: 

www.directechs.com