Viessmann VITOTROL 100 작동 가이드

Heating stops as soon as the actual
room temperature exceeds 21.3 °C.
Heating starts as soon as the actual
room temperature falls below 20.7 °C.
You can change the control characteris-
tics by changing the hysteresis value.
Select a lower value if your system
responds too slowly.

1.  Open the flap.

2.  Press twice 

.

3.  Select with  /  "SETTINGS".

4.  Confirm with OK.

5.  Select with  /  "Service".

6.  Confirm with OK.

7.  With  /  set the required hysteresis

value.

8.  Confirm twice with OK.

9.  Exit the menu with   .

Further adjustments

 (cont.)

5592 620 GB