UTC Fire & Security Sander Ph: 508.881.2000 전단
A UTC Fire & Security Company
This literature is provided for informational purposes only. KIDDE-FENWAL, INC. assumes
no responsibility for the product’s suitability for a particular application. The product must be
properly applied to work correctly.
If you need more information on this product, or if you have a particular problem or question,
contact KIDDE-FENWAL, INC., Ashland, MA 01721. Telephone: (508) 881-2000.
no responsibility for the product’s suitability for a particular application. The product must be
properly applied to work correctly.
If you need more information on this product, or if you have a particular problem or question,
contact KIDDE-FENWAL, INC., Ashland, MA 01721. Telephone: (508) 881-2000.
Kidde Fire Systems
A UTC Fire & Security Company
400 Main Street
Ashland, MA 01721
Ph: 508.881.2000
Fax: 508.881.8920
www.kiddefiresystems.com
A UTC Fire & Security Company
400 Main Street
Ashland, MA 01721
Ph: 508.881.2000
Fax: 508.881.8920
www.kiddefiresystems.com
K-90-9240M Rev AB
© 2007 Kidde-Fenwal Inc.
Printed in USA
Effective: April 2007
K-90-9240M
FM-200
®
Component Description
Dual Loop Bleed Kit
FEATURES
•
Two Configuration Options
•
See Kidde
®
Manual 90-FM200M-021 for
USCG Approval
•
For Use in Marine Applications
P/N: 06-129978-001
DESCRIPTION
The Dual Loop Actuation Kit can be installed in two con-
figurations. A configuration is chosen by the space avail-
able in the cylinder storage location. In Configuration 1
the four-way fitting is secured to a bulkhead or suitable
structural member, and a single actuation hose is used to
connect to the pressure operated control head on the
agent cylinder. The actuation piping is screwed directly
into the 1/4 in. check valves. It is recommended that a
union be installed in each connection to the dual-loop fit-
ting. In Configuration 2 the four-way fitting is connected
directly to the pressure operated control head. The con-
nection in to the actuation piping of both circuits is made
using a single actuation hose.
figurations. A configuration is chosen by the space avail-
able in the cylinder storage location. In Configuration 1
the four-way fitting is secured to a bulkhead or suitable
structural member, and a single actuation hose is used to
connect to the pressure operated control head on the
agent cylinder. The actuation piping is screwed directly
into the 1/4 in. check valves. It is recommended that a
union be installed in each connection to the dual-loop fit-
ting. In Configuration 2 the four-way fitting is connected
directly to the pressure operated control head. The con-
nection in to the actuation piping of both circuits is made
using a single actuation hose.
Male tapered threads must be prepared with Teflon
®
tape
or pipe compound (excluding first two threads). Do not
use tape or compound on flared fittings.
use tape or compound on flared fittings.
Figure 1. Configuration 1
Figure 2. Configuration 2
Item
Qty. in
Kit
Description
Part Number
1
1
Cap 7/16" (1/4" SAE Flare)
1/4" Tube
WK-263304-000
2
1
Bleed Fitting 1/8" NPT x 7/16"
(1/4" Tube)
(1/4" Tube)
WK-263303-000
3
3
1/4" NPT M x 1/8" NPT F
06-118318-001
4
1
4-Way 1/4" F
06-118319-001
5
2
1/4" NPT M x 1/4" NPT M
06-118320-001
6
2
1/4" Check Valve
264985
7
2
1/8" NPT x 7/16" (1/4" Tube)
06-118191-001
8
Not
Included
1/4" Actuation Hose, H. Duty,
34" Long
06-236215-001
9
1
1/4" NPT M x 1/8" NPT M
06-118321-001
1
2
3
4
5
5
6
6
3
7
8
PRESSURE OPERATED CONTROL HEAD
1/4" Sch. 80 pipe
1/4" Sch. 80 pipe
1
2
3
4
5
5
6
6
9
3 7
PRESSURE OPERATED CONTROL HEAD
8
8
FM-200 is a registered trademark of the Great Lakes Chemical Corporation..
Table 1. Dual-Loop Kit Components