Uniden EXAI7980I 사용자 매뉴얼
47
Additional information
(continued)
Mounting the base unit on a wall
[Standard wall plate mounting]
This phone can be mounted on any standard telephone wall plate.
1
Snap the wall mount adapter into the
notches on the base.
notches on the base.
2
Plug the telephone line cord to the
TEL LINE jack and the AC adapter to
the DC IN 9V jack.
TEL LINE jack and the AC adapter to
the DC IN 9V jack.
3
Plug the telephone line cord into the
telephone outlet.
telephone outlet.
4
Wrap the AC adapter cord inside the
molded wiring channel. Then wrap
the cord around the strain relief notch.
molded wiring channel. Then wrap
the cord around the strain relief notch.
5
Plug the AC adapter into a standard
120VAC wall outlet.
120VAC wall outlet.
Note
Use only the Uniden AC
adapter supplied with this
phone.
adapter supplied with this
phone.
6
Raise the antenna to a vertical
position.
position.
7
Align the mounting slots on the base.
with the mounting posts on the wall.
Push in and down until the phone is
firmly seated.
with the mounting posts on the wall.
Push in and down until the phone is
firmly seated.
1
AC adapter
Wall plate
AC outlet
2, 3, 4,
5, 6, 7
5, 6, 7
EXAI 7980 6th HEN 99.8.24 4:54 PM Page 47