Uniden BTS150 사용자 설명서

English - 5

4.  The LEDs flash blue while the battery is charging (charge time = 7.5 hours on a 

completely empty battery). The LEDs turn solid blue when the battery is fully charged. 

When you turn on your speaker for the first time, it automatically goes into pairing mode. 

The LEDs rapidly flash red and blue while in pairing mode. After you pair Bluetooth devices 

to your speaker, the next time you turn it on it searches for these paired devices and then 

moves into a standby state.
1.  Slide the main power switch to the ON position.
2.  Press and hold   for at least 3 seconds. A “power on” tone sounds. 
3.  The LEDs flashes blue and red slowly while looking for Bluetooth devices. It remains 

steady on (blue) when Bluetooth devices are discovered; otherwise, it keeps flashing.

Pair your first Bluetooth device to your speaker when you turn your speaker on for the first 

time. Be sure your speaker is in pairing mode (see page 6).
1.  Select a Bluetooth V2.0 device (mobile phone or music player) to pair.