Uniden UDC-5M 사용자 설명서

English

Release your finger from the shutter button.
h The captured image is recorded.

i When the shutter button is pressed 

halfway, the camera focuses on the 
subject, and as long as the shutter button 
is kept pressed halfway, the focus is fixed 
(locked) at the same distance. This is 
called “focus lock”. After focusing on the 
subject, you can then reorient the camera 
while keeping the shutter button pressed 
halfway to compose the picture you like.

i A target mark & on the monitor shows 

the area the camera is focusing on.

i The camera automatically determines the 

correct focus by measuring from 9 
different focus points within the shooting 
area. If the target mark is at a position 
that is different from the point you wish to 
focus on, you can refocus, for example, 
by changing the shooting angle.

i The large target mark appears when 

the camera focuses on a wide area in 
the center of the screen.

i A green focus indicator appears when 

the subject is successfully focused, or a 
red focus indicator when the camera was not able to focus the subject.

i When the camera focuses and the target mark appears, at the same time, the 

shutter speed and aperture settings are also displayed. You can use them as a 
reference when shooting.

i During still image shooting, if the shutter speed is slow and the possibility 

that the image may be blurred due to camera shake becomes high, the 
motion alert icon may appear on the monitor. In this case, use a tripod to 
stabilize the camera when shooting, or set the flash operation mode to 
automatic (page 43).

i When shooting with the scene function set to the fireworks ^ mode, the 

motion alert icon always appears, but this is normal.

Shutter speed

Aperture

Target mark

Motion alert icon

Focus indicator