Siemens SC9000 사용자 설명서

DU-DR-0016-SC9000 Rev A 6/4/02 GCX Corp. Page 1 of 4

GCX Mounting Assembly Operation/Installation Manual

Dräger Model Cato

with Siemens SC9000 Patient Monitor

Patient Monitor – Left Side on Pivot Arm / Power Supply on Right Side

The purpose of these instructions is to:

1. Describe attachment of GCX mounting hardware to the Cato anesthesia machine.

2. Describe attachment of the Siemens monitor to the GCX mounting hardware.

WARNING: USE OF MOUNTING HARDWARE AND MONITORING COMPONENTS OTHER THAN THOSE
DESCRIBED

THIS

DOCUMENT MAY RESULT IN SERIOUS INJURY DUE TO TIPPING OF THE

ANESTHESIA

MACHINE.

THIS CATO MOUNTING CONFIGURATION REQUIRES THE 40KG COUNTERWEIGHT WITH

EXTENDED

WHEEL

ADAPTER

UPGRADE

SET FROM DRÄGER (PART NUMBER: 86 018 68)

Installer: When installation is completed, provide these instructions to the end user for future reference.

INSTALLATION

Tools Required: Philips head screw driver, Hex key (incl.).

Mounting the Channel to Cato Edition

Parts Required: 4" Channel, M6 x 16 mm FHMS screws (2).
Brass

Plate

with

inserts

from

Dräger

(M29110)

1. To attach the Channel to the Cato left side accessory track,

locate the brass plate in the accessory track, align the

mounting holes in the Channel with the threaded holes on

the brass plate then run the M5 flat head screws (2) partly

in. (Note: Fixed Stop is at the bottom of the Channel)

2. Set the height of the Channel in the accessory track and

tighten the M6 screws to hold in place.

Prepare M Series Arm

1) Install the Tilt Limiting Stop screw.

M6 x 16 mm (2) FHMS

Accessory Track

Fixed Stop

5/16-18 x ½” SHCS (1)