Siemens Camera Accessories 6DS2-510-0xx00-0xa0 사용자 설명서

Product Information

February, 1999

BRIDGE CS-L2

S79220-A0978-A-05-7637

Page 3 of 20

2 Commissioning

The Memory Card contains the entire system software for the Bridge (version V02.01) .
To perform an upgrade or update from diskette, a BRIDGE CS-L2 memory card must be
available.
The upgrade procedure is performed offline with a PC or a programming device having a
compatible MC interface (e.g. PG740).
The update procedure is performed either from the IBS terminal (online) or from a
programming device having a compatible MC interface (e.g. PG740).
A description of the upgrade procedure is provided under heading 2.2 in this document, of
the update procedure under heading 2.3 .

Caution: The file RM3_PC1.SYS on the memory card must never be deleted, moved or

overwritten, as this would mean that the memory card would no longer be
bootable!

2.1 Startup by Commissioning Terminal

Additional the IBS-Tool diskette contains your local tool in the directory ASBEDIEN. Install
this on your PC to be used for commissioning of the BRIDGE CS-L2 according to the
installation instructions in the document file ASBEDI_E.DOC in the directory ASBEDIEN,
and connect your PC to the serial commissioning interface of your BRIDGE CS-L2 via a
serial interface.
For operation under Windows 3.1, a PIF file is delivered with the software. This contains
the following settings: run in full screen mode, exclusive foreground execution, foreground
priority very high.
For operation under Windows 95, the following setting should be specified: idle time
activity very low; no screen saver.
Using your "Commissioning terminal" installed in this manner and the commands of the
ASBEDIEN input program you can access all data on the memory card inserted in the
BRIDGE CS-L2.

Read the parameter files which have to be processed to enable parameterization from the
memory card into a file on your PC using the command "COPY_PC ...". You can modify
this file on your PC according to your system configuration using the ASCII editors which
can be executed under DOS, and then write them back onto your memory card using the
ASBEDIEN command "COPY_TM ...".

Note:
Before starting the UPGRADE/UPDATE activities, please ensure that a current backup of
any files that are to be modified exists. This will allow the previous software version to be
restored in the even of unforeseen circumstances. The files on the memory card are not
write protected, so care should be taken when accessing the memory card.
To back up the files from the memory card to your archive, use the ASBEDIEN command
"COPY_PC ...".