Presonus Audio electronic 26x26 FireWire Recording System 사용자 설명서

 

15 

3.1 Control Console -Overview 
Please install the FIRESTUDIO drivers and open the FIRESTUDIO Control Console 
before continuing through this section of the manual. A hands-on approach is very 
helpful in learning all of the features the Control Console has to offer. 

The Control Console has two main tabs, found at the top left of the window, ‘Mixer’ 
and ‘Outputs/Router’. Click on either tab to access the Mixer or Matrix Router. 
Depending on your situation you may not need to use the Mixer or Matrix Router, 
however, knowing how to use this software can greatly enhance your studio’s efficiency 
and ease of use. Here’s a short list of what this software allows you to do: 

•  Create multiple monitor mixes of all inputs and playback streams (ie; not 

everyone in the band has to hear everything equally). 

•  Send analog inputs to digital outputs, and vice versa. (ie; the FIRESTUDIO 

can function as a standalone AD/DA with zero latency) 

•  Create sends and returns for any input to incorporate external processors with 

zero latency. 

•  Give every input its own hardware output for incorporation into a larger studio 

console or other recorder.  

•  Send mixes out of several types of outputs simultaneously (TRS, ADAT, 

SPDIF) to different devices for monitoring comparisons.  

Note that ADAT channels 9-16 are not currently available in the FireStudio in the 
Control Console. You cannot mix our route these channels with the FireStudio 
Control Console. These channels may be monitored via your DAW software.