Presonus Audio electronic 26x26 FireWire Recording System 사용자 설명서

 

8 

2.2 Hardware Controls and Analog/Digital Connections 
Your FIRESTUDIO can simultaneously record/playback a total of 26 inputs and 
outputs. The following will outline each connection type in detail from left to right on 
the front and back panels: 
 
Front Panel: 

 

a.)  48 Volt Phantom Power: These two switches will activate phantom power for 

microphone preamps 1-4 and 5-8 respectively. Phantom Power is only active 
on the microphone XLR input.  

b.)  Neutrik Combo Connectors: These connectors can accept either 1/4” TS/TRS 

or XLR inputs. Channels 1 and 2 feature an instrument level input on the 1/4” 
connector for use as a Direct Injection input for guitar, bass, etc. Channels 3-8 
accept line level input on the 1/4” connector. The XLR input on all channels 
accepts microphone level input.  

c.)  Gain/Trim Controls: Each channel has its own gain/trim control and clip light. 

The clip light will illuminate red when the preamp is clipping.  

d.)  Headphone Output: This headphone output can be assigned any output from 

your DAW or the FIRESTUDIO Control Console, and has its own level control.  

e.)  Main Level: This level control will attenuate the Main Output on the back of 

the FIRESTUDIO.   

f.)  Sync LED: This sync LED will illuminate RED when sync is NOT present and 

BLUE when sync is present, indicating whether or not your FIRESTUDIO is 
properly connected and installed to your computer, or properly synced to 
another device (via ADAT, SPDIF, or BNC). 

g.)  Power Switch: This power switch will turn on/off power for the FIRESTUDIO.  

Back Panel: 

 

a.) Power Connector: This power connection allows the included power adapter to 

screw tightly in, insuring that power is not accidentally disconnected from the 
FIRESTUDIO. 

b.) FireWire Ports: The included FireWire cable will connect to either port here 

from your computer. The other port can be used to daisy-chain another 
FIRESTUDIO.