Perfectone Net Ware IP 300 사용자 설명서
IP 300 User Manual
50
Usage
: the system connects to the FTP server auto to get the corresponding
file and deal with it.
Relevant usage: ftp X
X ranged from 0 through 2:
X-0: Connect to FTP Server to get the file of updating program and save it to
the SDRAM of the phone. Then the file can be read by PalmTool. This
operation aims at testing.
X-1: Connect to FTP Server to get the file of updating program and update
program Flash. This operation aims at updating program.
X-2: Connect to FTP Server to get the file of updating dial rules and update
program Flash. This operation aims at updating dial rule.
X-0: Connect to FTP Server to get the file of updating program and save it to
the SDRAM of the phone. Then the file can be read by PalmTool. This
operation aims at testing.
X-1: Connect to FTP Server to get the file of updating program and update
program Flash. This operation aims at updating program.
X-2: Connect to FTP Server to get the file of updating dial rules and update
program Flash. This operation aims at updating dial rule.
Note
When you use ftp 0 and ftp 1 commands, if the file get from FTP server is too
large or the net speed is too slow, then the process will not be seen in telnet
window. Please be patient. Using ftp command in telnet to get file spends almost
same minutes as getting file using phone. So if nothing is displayed after too long
time, it means that ftp is fail.
window. Please be patient. Using ftp command in telnet to get file spends almost
same minutes as getting file using phone. So if nothing is displayed after too long
time, it means that ftp is fail.
Note
All the Telnet commands of IP-300 IP phone should be written in low case and the
password is case sensitive.