Toshiba AD268 사용자 설명서
![Toshiba](https://files.manualsbrain.com/attachments/acaaaa9cc6b763ccfc72ced2ae95d9c94b8b8632/common/fit/150/50/8adbcbcd45c75dc53932fc9caf6f2740daed52d836b76efbd0162ac2599f/brand_logo.png)
60
Analog I/O Modules (AD268 / DA264 / TC218)
1. Introduction
PART 3 TC218
1. Introduction
The TC218 is a thermocouple input module for the T2 series programmable controllers.
The TC218 is used to measure the temperature using thermocouples. Thermocouples type K,
J, or E can be used.
The TC218 can be used for
The TC218 is used to measure the temperature using thermocouples. Thermocouples type K,
J, or E can be used.
The TC218 can be used for
±
100mV input also.
When the TC218 is used for the thermocouple input, it has 7 channels of thermocouple input.
The remaining 1 channel is used to measure the ambient temperature for cold junction
compensation. For this purpose, a thermistor is attached with the TC218.
On the other hand, when the TC218 is used for
The remaining 1 channel is used to measure the ambient temperature for cold junction
compensation. For this purpose, a thermistor is attached with the TC218.
On the other hand, when the TC218 is used for
±
100mV input, it has 8 channels of input.
1.1 TC218 Functions
The TC218 has the following functions.
1) 7 channels input per module for thermocouple input
8 channels input per module for
±
100mV input
2) Selectable input type
•
Thermocouple type K (-200 to +1200
°
C)
•
Thermocouple type J (-200 to +800
°
C)
•
Thermocouple type E (-200 to +600
°
C)
•
±
100mV
3) 16-bit high-resolution A/D conversion
4) Built-in linearize function
5) Cold junction compensation function
6) Burnout detection function
7) Input data averaging function
8) Gain and offset calibration function (
4) Built-in linearize function
5) Cold junction compensation function
6) Burnout detection function
7) Input data averaging function
8) Gain and offset calibration function (
±
100mV input only)
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net