Telus Modem IR1200 사용자 설명서
iR1200 Modem
9
proceed with the remaining instructions.
7.
The Select Network Component Type window opens. Highlight Protocol and then click Add.
8.
The Select Network Protocol window opens. Under Manufacturer, select Microsoft. Under Network Protocol, select
TCP/IP. Click OK.
TCP/IP. Click OK.
9.
The TCP/IP Dial-Up Adapter appears in the list.
10. If the Dial-Up Adapter appears in the Network Adapters list, it is installed. You may proceed with installation.
11. If the Dial-Up Adapter does not appear in the Network Adapters list, you do not have a Dial-Up Adapter installed.
Refer to instructions for installing Dial-Up adapter.
12. Click OK to close the Select Network Protocol window.
Installing the Dial-Up Adapter
The following steps describe how to install the Dial-Up Adapter on your computer.
1.
From the Select Network Adapter window, highlight Dial-Up Adapter in the Network Adapters list.
2.
Under Manufacturers, highlight Microsoft. Click OK.
3.
The Select Network Component Type window opens. Highlight Adapter. Click Add.
4.
The Select Network Adapters window opens.
5.
To verify that the adapter was added, from Start, select Settings.
6.
Select Control Panel.
7.
Click Network.
8.
Look for Dial-Up Adapter on the Network Configuration screen.
NOTE: If it is determined that your computer does not have dial-up networking, please proceed to the
“Manual Modem Configuration” for instructions for how to install dial-up networking.
Windows NT/2000
NOTE: Windows 2000 and XP users must be logged in as the Administrator of the local machine.
Verify Dial-Up Networking
The following steps describe how to verify if dial-up networking is installed on your computer.
1.
From your desktop, double-click the My Computer icon to open the My Computer window.
2.
Double-click the Dial-Up Networking icon to open the Dial-Up Networking window.
3.
The Dial-Up Networking window opens and displays the Phone book entry to dial heading.
4.
If the Dial-Up Networking window displays the Install prompt then dial-up networking has not been installed.
5.
Click Close to close the Dial-Up Networking window.
Verify TCP/IP Protocol Installation
The TCP/IP protocol is automatically installed as the default protocol for most Windows installation. However, for some
Windows NT and 2000 installations, TCP/IP may not have been included.
Windows NT and 2000 installations, TCP/IP may not have been included.