Team Products PMP200XL 사용자 설명서

1

2

3

4

5

6

7

8

9

10

Location of Controls
1. ON/OFF Power Switch
2. Green LED Indicator Light
3. Protective Outlet Cover
4. 110/120 Volt AC Outlet
5. Cooling Fan
6. Red LED Indicator Light
7. 12Volt DC Power Cord
8. Clips For Power Cord
9. Fuse Cover
10. 25Amp Fuse

2

Welcome
This COLEMAN® product has been carefully engineered and manufactured 

to give you dependable operation. Please read this manual thoroughly before 

operating your new COLEMAN® product, as it contains the information you 

need to become familiar with its features and obtain the performance that will 

bring you continued enjoyment for many years. Please keep this manual on file 

for future reference. 

About COLEMAN® Inverters
The new line of super-efficient COLEMAN® power inverters are innovative in 

design and have the highest surge capability in the industry. These extremely 

advanced, microprocessor controlled units run cooler and more reliable than 

any in their class. Their superior surge capability allows them to start even 

the most difficult loads, including color televisions, TV/VCR combinations, 

microwaves, refrigeration units, even small air conditioners! They also sport 

the highest efficiency available (up to 80%) which translates into longer running 

time and extended battery life. Inverters convert low voltage, direct current (DC) 

to 110/120-volt alternating current (AC). Depending on the model and its rated 

capacity, the inverters draw power either from standard 12-volt automobile and 

marine batteries or from portable high power 12-volt sources.

Getting Started
When you turn on an appliance or a tool that operates using a motor or a tube, 

(such as a television), it requires an initial surge of power to start up. This surge 

of power is referred to as the “starting load” or “peak load”.
Once started, the appliance or tool requires less power to continue to operate. 

This is referred to as the “continuous load.”  You will need to determine how 

much power your appliance or tool requires to start up (peak power) and it’s 

continued operating power requirements (continuous load). Power consumption 

is rated either wattage (watts) or amperes (amps). This information is usually 

stamped or printed on most appliances and equipment. If this information is 

not indicated on the actual product, check the owner’s appliance or equipment, 

check the owner’s manual or contact the manufacturer to determine the power 

consumption. Be sure that the power consumption of the item you wish to 

operate is rated at 200 watts or less.
Multiply: AMPS X 110/120 (AC voltage) = WATTS
This formula yields a close approximation of the continuous load of the 

appliance. All COLEMAN® inverters are designed to automatically shut down in 

the event of a power overload.  This protection feature prevents damage to the 

unit while testing items with ratings in the 200-watt range.

1

PMP200XL_122205M.indd   6-7

12/22/05   9:09:47 AM