Netgear LG6100D 사용자 가이드
Set up a Virtual Private Network (VPN)
127
Each IKE exchange uses one encryption algorithm that can be 3DES, AES128 or
AES256. The default value is AES128.
AES256. The default value is AES128.
17. Select the Phase 2 authentication.
Each IKE exchange uses one hash algorithm. MD5 and SHA-1 are supported. The
default value is SHA1.
default value is SHA1.
18. Select the key Phase 2 key group (DH group).
Each IKE exchange uses one DH group to make a secure exchange. Supported DH
groups are: DH1 (768), DH2 (1024), DH5 (1536), and DH14 (2048). The default value is
DH2 (1024).
groups are: DH1 (768), DH2 (1024), DH5 (1536), and DH14 (2048). The default value is
DH2 (1024).
19. Click Submit.
Edit an IKE Policy
You can edit IKE policies. The following rules apply.
●
You can’t edit the IKE policy if it is in use by VPN site-to-site configuration.
●
You can’t edit the IKE policy name. To configure different IKE policy name, you must
delete the policy and recreate it with different name.
delete the policy and recreate it with different name.
To edit an IKE policy:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Manage VPN > Site-to-Site Configuration.
The IKE Policy section shows a list of IKE policies.
5. Click the Edit icon in the Action column for the policy.
The Edit IKE Policy screen displays.
6. Change the settings.
7. Click Submit.
Delete an IKE Policy
You can delete IKE policies. You can’t delete the IKE policy if it is in use by VPN site-to-site
configuration.
configuration.