Namco Bandai Games Welder 90500019 사용자 설명서
Page
6
2.
If this machine is installed next to walls or other machines, ensure there is
plenty of space between them
plenty of space between them
NOTE:
So that customers are not crushed or injured while the machine is
moving, ensure that it is separated from walls or other machines by at
least 30cm.
moving, ensure that it is separated from walls or other machines by at
least 30cm.
NOTE:
In order that the PCB rack or power supply can be removed for service,
make sure that the rear of the machine is separated from a wall or
other machine by a distance of at least 50cm or more.
make sure that the rear of the machine is separated from a wall or
other machine by a distance of at least 50cm or more.
3-3. Notes on Moving and Shipping
NOTE: If the seat assembly is not secured to the seat base, there is a danger of the
seat assembly moving left or right during shipping. Ensure that the shipping
brackets (two for each seat assembly) are fitted securely.
brackets (two for each seat assembly) are fitted securely.
NOTE: The tower assembly has a high centre of gravity and is unstable when
standing alone. Do not use a forklift when moving or shipping.
•
Take care not to damage the machine when moving or shipping.
•
Take care not to rope moulded (plastic) parts when shipping.
•
Ensure that the levellers are raised fully when moving the machine, even for
short distances.
short distances.
•
The seat assy, tower assy and side boards must be separated when shipping.
•
If a forklift is used to move the machine, use it only to move the seat assembly
and only insert the forks in the places indicated on the side of the assembly.
and only insert the forks in the places indicated on the side of the assembly.