Namco Bandai Games Welder 90500019 사용자 설명서
Page
15
5-3-4
Switch Test
The following screen is displayed when "SWITCH" is selected on the I/O
screen.
I/O TEST
DIP
2
12345678
3
12345678
LINK ON 2
COUNT 0
SWITCH
(a) Accelerator
................
GAS:
*0000
COIN 1:
OFF
.............. (e) Coin 1 switch
(b) Brake
................
BRAKE
*0000
COIN 2:
OFF
.............. (f) Coin 2 switch
(c) Steering
................
STEER
*0000
SERVICE:
OFF
.............. (g) Service switch
(d) Shift
................
SHIFT
CENTRE
VIEW:
OFF
.............. (h) View change switch
TO EXIT, STEP ON GAS AND SHIFT UP
(a)
When the accelerator is stepped on, the number increases in the + direction.
(b)
When the brake is stepped on, the number increases in the + direction.
(c)
When the steering wheel is turned to the right, the number increases in the +
direction, and when it is turned to the left, it increases in the - direction.
When items (a), (b), and (c) are in their middle position, "0000" is displayed. (It is
normal for the last digit to change.) Just before the steering wheel is as far as it
will go, or just before stepping on the accelerator or brake as far as they will go,
"OK" will be displayed to the right of the number if everything is correct.
(d)
Displays the position of the shift lever (CENTRE, UP, DOWN) and the state of
the switches.
When the shift lever is pressed forward, switch 1 goes "ON" and "DOWN" is
displayed, and when it is pulled back, switch 2 goes "ON" and "UP" is displayed.
(e)
When coin 1 switch is operated, "ON" is displayed.
(f)
U
nused.
(g)
Goes "ON" when the service switch inside the coin door is pressed.
(h)
Goes "ON" when the view change button is pressed
To return to the menu screen, move the shift lever up and step on the accelerator.