Namco Bandai Games Welder 90500019 사용자 설명서
Page
19
5-4
Linking Two or More Machines.
Up to four machines (8 seats) can be linked together.
The machines should be linked as described below.
The machines should be linked as described below.
NOTE: Each machine can draw up to 8 amps. Make sure that the power supply
is adequate.
1)
Ensure that the power is "OFF".
2)
Loosen the two screws (M4x10) on the back of the tower assy, and remove the
connector cover.
connector cover.
3)
Set the link switches to "ON" , "EXT",
and "ON". (See Diag.)
and "ON". (See Diag.)
4)
Use the supplied link cable and connect
the machines between "IN" and "OUT"
sockets (See Diag.)
the machines between "IN" and "OUT"
sockets (See Diag.)
[Examples of Linked Machines]
a)
2 Machines
(4 Seats)
(4 Seats)
b)
3 Machines
(6 Seats)
(6 Seats)
c)
4 Machines
(8 Seats)
(8 Seats)