Korg Bicycle PS60 사용자 설명서
Performance Edit
10
MIDI Filter
Main Timbres (A. Piano–Synth):
Sub Timbres (A. Piano–Synth):
Sub Timbres (A. Piano–Synth):
These settings allow you to apply filters to the MIDI data
that will be transmitted and received by each timbres. For
example even if two timbres are being played by the same
MIDI channel, you can adjust the settings so that the
damper pedal will apply to one but not the other.
On: Transmission and reception of MIDI data is enabled.
If “Status” (page 7) is set to INT, effects that pertain to this
setting that are turned On will apply to the timbreʹs pro‐
gram when you use the PS60ʹs controllers or when MIDI
data is received. (The Effect Dynamic Modulation function
is not affected by these settings.)
With the EXT or EX2 setting, the corresponding MIDI data
will be transmitted on the channel of that timbre when you
use the PS60ʹs controllers. MIDI transmit/receive settings for
the entire PS60 are made in Global mode “MIDI Filter”
(page 73).
MIDI filtering for controllers whose function is user‐assign‐
able (the foot switch or foot pedal) will apply if that MIDI
control change is assigned to the controller. If you assign the
same control change as the damper or joystick, the damper
or joystick setting will take priority. If the same control
change is assigned to more than one controller, turning On
just one of them will enable that control change.
Off: Transmission and reception of MIDI data is disabled.
Note: MIDI CC# = MIDI control change message numbers.
that will be transmitted and received by each timbres. For
example even if two timbres are being played by the same
MIDI channel, you can adjust the settings so that the
damper pedal will apply to one but not the other.
On: Transmission and reception of MIDI data is enabled.
If “Status” (page 7) is set to INT, effects that pertain to this
setting that are turned On will apply to the timbreʹs pro‐
gram when you use the PS60ʹs controllers or when MIDI
data is received. (The Effect Dynamic Modulation function
is not affected by these settings.)
With the EXT or EX2 setting, the corresponding MIDI data
will be transmitted on the channel of that timbre when you
use the PS60ʹs controllers. MIDI transmit/receive settings for
the entire PS60 are made in Global mode “MIDI Filter”
(page 73).
MIDI filtering for controllers whose function is user‐assign‐
able (the foot switch or foot pedal) will apply if that MIDI
control change is assigned to the controller. If you assign the
same control change as the damper or joystick, the damper
or joystick setting will take priority. If the same control
change is assigned to more than one controller, turning On
just one of them will enable that control change.
Off: Transmission and reception of MIDI data is disabled.
Note: MIDI CC# = MIDI control change message numbers.
Program Change
[Off, On]
Specifies whether or not MIDI program change messages
will be transmitted and received.
will be transmitted and received.
Damper
[Off, On]
Specifies whether or not MIDI CC#64 hold (damper pedal)
messages will be transmitted and received.
messages will be transmitted and received.
Portamento SW
[Off, On]
Specifies whether or not MIDI CC#65 portamento on/off
messages will be transmitted and received.
messages will be transmitted and received.
JS X as AMS
[Off, On]
Specifies whether or not MIDI pitch bend messages (the X
axis of the joystick) will be received to control the AMS
effect assigned to JS X. (This is not a filter for MIDI pitch
bend message reception.)
axis of the joystick) will be received to control the AMS
effect assigned to JS X. (This is not a filter for MIDI pitch
bend message reception.)
JS+Y
[Off, On]
Specifies whether MIDI CC#1 (the +Y axis of the joystick)
will be transmitted and received.
will be transmitted and received.
JS–Y
[Off, On]
Specifies whether MIDI CC#2 (the –Y axis of the joystick)
will be transmitted and received.
will be transmitted and received.
Ribbon (CC#16)
[Off, On]
Specifies whether or not MIDI CC#16 will be transmitted or
received.
received.
Foot SW
[Off, On]
Specifies whether or not the effect of the assignable switch
will be transmitted and received. The function is assigned in
Global: Basic/MIDI Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
will be transmitted and received. The function is assigned in
Global: Basic/MIDI Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Foot Pedal
[Off, On]
Specifies whether or not the effect of the assignable pedal
will be transmitted and received. The function is assigned in
Global: Basic/MIDI Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
will be transmitted and received. The function is assigned in
Global: Basic/MIDI Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Other CC
[Off, On]
Specifies whether or not MIDI control messages not covered
in the preceding items MIDI Filter will be transmitted and
received.
in the preceding items MIDI Filter will be transmitted and
received.