Marantz AV Pre Tuner AV7005 사용자 설명서
62
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
Video output
Video Connection
The video signals of this unit’s ZONE2 video output terminal are
played by the ZONE2 TV.
VIDEO
IN
ZONE2
VIDEO
COMPONENT
VIDEO IN
Y
P
B
P
R
MAIN ZONE
ZONE2
This unit
NOTE
• It is not possible to output video signals input to the HDMI terminals
to ZONE2.
• When using component output terminal 2 for ZONE2 video signal
output, set “Manual Setup” – “Option Setup” – “Component2
Output” (vpage 85) in the menu to “ZONE2”.
Output” (vpage 85) in the menu to “ZONE2”.
• The menu screen is not output.
Playback
1
Press
Z2
or
Z3
to switch the
remote control operating mode.
The remote control unit switches to the
operating mode for ZONE2 or ZONE3.
operating mode for ZONE2 or ZONE3.
2
Press
ON
to turn on the ZONE2
or ZONE3 power.
The
or
indicator on the
display lights.
• When
STANDBY
is pressed, ZONE2 or
ZONE3 turns off.
• Power in ZONE2 or ZONE3 can be turned
on or off by pressing
SOURCE ON/OFF
.
• Power in ZONE2 or ZONE3 can be turned
on or off by pressing
ZONE2 ON/OFF
or
ZONE3 ON/OFF
on the main unit.
3
Press
INPUT df
.
The audio signal of the selected source is output to ZONE2 or
ZONE3.
ZONE3.
• Turn
INPUT SELECTOR
after
pressing
ZONE SELECT
on the
main unit to select an input
source.
source.
When power for both MAIN ZONE and ZONE2 is set to ON, power of
the MAIN ZONE only can be turned off. Select “AMP” in step 1 then
press
the MAIN ZONE only can be turned off. Select “AMP” in step 1 then
press
STANDBY
.
Adjusting the volume
Use
VOLUME
to adjust the volume.
G
Adjustable rangeH – – – –80dB – –40dB – 18dB
(When the “Volume Display” (vpage 84) setting is “Relative”)
G
Adjustable rangeH
0 – 41 – 99
(When the “Volume Display” (vpage 84) setting is “Absolute”)
• At time of purchase, “Volume Limit” (vpage 83) is set to “–10dB
• At time of purchase, “Volume Limit” (vpage 83) is set to “–10dB
(71)”.
Turn
VOLUME
after pressing
ZONE SELECT
on the main unit to adjust
the sound volume.
Turning off the sound temporarily
Press
MUTE
.
The sound is reduced to the level set at “Mute Level” (vpage 84) in
the menu.
• To cancel, either adjust the volume or press
the menu.
• To cancel, either adjust the volume or press
MUTE
again.
• The setting is canceled when the zone’s power is turned off.
You can adjust the tone and volume for ZONE2 and ZONE3 in “Zone
Setup” (vpage 83) in the menu.
Setup” (vpage 83) in the menu.
1.AV7005U_ENG.indd 62
2010/08/23 18:33:06