Lowrance electronic 8VHF 사용자 설명서

You can set up the radio to respond to an LL polling request in one of three ways: 

•  MANUAL  reply manually to any incoming LL polling requests from your buddies. 
•  AUTO 

automatically replies to any incoming LL polling requests from any of 

your buddies. 

•  OFF 

ignores all incoming buddy LL polling requests. 

DSC SETUP

 INDIV REPL

▲

 DSC FUNC

►LL REPLY

 AUTO SWITC

▼

LL REPLY

►MANUAL

 AUTO

 OFF

1. 

Select DSC SETUP then LL REPLY.

2. 

Select your response and press ENT to confirm and return to the menu.

When a DSC call is received, it may include a request to change to a specific channel for 
subsequent communications. If a channel switch request is included, your options are:

•  allow the radio to switch to the requested channel immediately by pressing the ENT 

button, or

•  do nothing to allow the radio to automatically switch to the requested channel after a 

delay of 10 seconds, or

•  cancel the automatic switch and remain on the current channel by pressing the EXIT button.

However, automatic switching to a subsequent communications channel on receipt of a DSC 
call might in some cases disrupt important ongoing communications if the working channel 
changes without the operator knowing. 
You can prevent the radio from automatically switching from the current working channel by 
setting the AUTO SWITCH feature to OFF.

If the AUTO SWITCH feature is set to OFF, an 

 will be displayed on the LCD to remind you 

that this feature is set to off. Additionally, the text “AUTO SW OFF” will be included in an All 

Ships or Group call replacing the text “AUTO CHxx” 

DSC SETUP

 DSC FUNC  

▲

 LL REPLY

►AUTO SWITC

 TEST REPLY

▼

AUTO SWITCH

►ON

 OFF

1. 

 Select DSC SETUP, then AUTO SWITCH.

2. 

Select ON (on) to enable automatic channel switching.

3. 

Select OFF (off) to disable automatic channel switching.

Lowrance - Link-8 Operation Instructions

41