HP Cell Phone Accessories E6380-90019 사용자 설명서
124
Chapter 5
Analog Measurements - Screens and Control Fields
AFGen1 Freq
AFGen1 To
AFGen1 Freq
This field sets the frequency for the first audio frequency sinewave
generator.
generator.
Screens on which this field is displayed
RF GENERATOR
AFGen1 To
This field has two subfields:
• The upper field sets the destination port for audio frequency
generator 1
•
FM
-RF generator FM modulator
•
AM
-RF generator AM modulator
•
Audio Out
-AUDIO OUT connector
• The lower field
• sets FM modulation deviation if the upper field set to
FM
• sets AM modulation depth if the upper field set to
AM
• sets the amplitude of audio signal (volts RMS) at the AUDIO
OUT connector if upper field is set to
Audio Out
• turns off the AF generator if the
Yes On/Off
key is pressed.
Operating Considerations
Simultaneous FM and AM, using both AF generators is not allowed.
AF generators 1 and 2 are automatically turned off any time the CDMA
screens are displayed. This prevents accidental amplitude or frequency
modulation of the CDMA carrier. The AF generators are turned back on
when you exit the CDMA screens (if they were previously turned on).
screens are displayed. This prevents accidental amplitude or frequency
modulation of the CDMA carrier. The AF generators are turned back on
when you exit the CDMA screens (if they were previously turned on).
Screens on which this field is displayed
RF GENERATOR
Main Menu