High End Systems Technobeam 사용자 설명서

Technobeam

®

 User Manual

3-27

The following sensor information is available:

•

LTR -  view whether the litho rotate (within the wheel) sensor is 

obstructed (“OFF”) or is not obstructed (“ON”)

•

LTO - view whether the litho wheel sensor is obstructed (“OFF”) or 

is not obstructed (“ON”)

•

COLR -view whether the color wheel sensor is obstructed (“OFF”) or 

is not obstructed (“ON”)

•

FX -

view whether the effects wheel sensor is obstructed (“OFF”) 
or is not obstructed (“ON”)

To view the specified sensor information:

1.

Press and hold the <Menu> button until “ADDR” appears on the LED 
display.

2.

Using the <Up> and <Down> arrow buttons, scroll to the “INFO” menu 
and press the <Enter> button to select the “INFO” menu.

3.

Using the <Up> and <Down> arrow buttons, scroll to the “SENS” menu 
and press the <Enter> button to select the “SENS” menu.

4.

Using the <Up> and <Down> arrow buttons, scroll to the desired option 
(listed above) and press the <Enter> button to select the desired option 
to view its sensor information.

Resetting Fixture Hours (F/RS)

This menu item allows you to track the number of hours the fixture has 
been operating.

To reset the fixture hours to zero:

1.

Press and hold the <Menu> button until “ADDR” appears on the LED 
display.

2.

Using the <Up> and <Down> arrow buttons, scroll to the “INFO” menu 
and press the <Enter> button to select the “INFO” menu.

3.

Using the <Up> and <Down> arrow buttons, scroll to the “F/RS” option 
and press the <Enter> button to select the “F/RS” option*.  The LED will 
display “0000” when the fixture hours are reset.

*Note

This option has a 5-second delay to avoid inadvertent 
changes.  To reset the fixture hours, you must press and 
hold the <Enter> button for at least 5 seconds.

Resetting Lamp Hours (L/RS)

This menu item allows you to track the number of hours the lamp has 
been operating.  You should reset the lamp hours every time you 
change the lamp.