Hitachi Flooring NT50AGF 사용자 설명서

— 19 —

1) Adjust the air pressure at recommended operating pressure 90-

115 psi (6.2 - 7.9 bar   6.3 - 8.1 kgf/cm2) according to the length of 

fasteners and hardness of workpiece.

The correct air pressure is the lowest pressure which will do the 

job. Using the Tool at a higher than required air pressure unneces-

sarily over stresses the Tool.

Insert Nails into the Nail Rail as 

shown.  Pull back the Pusher 

Bracket (Ref. No. 59) to engage and 

position the Pusher Finger (Ref. No. 

49) behind the loaded Nail Clip(s).  

This will provide pressure against 

the nails and move them into the 

proper position for the nailing func-

tion of the tool.