Garmin Forerunner 920XT 사용자 매뉴얼

22 

ANT+ Sensors

Before you can pair, you must put on 

the heart rate monitor or install the 

sensor. See the quick start manual or the 

accessory instructions.
If your Forerunner does not show data 

from the accessory, you may need to pair 

the accessory to your Forerunner. Pairing 

is the connecting of ANT+™ wireless 

sensors, for example, connecting your foot 

pod with a Forerunner. After you pair the 

first time, your Forerunner automatically 

recognizes your foot pod each time it is 

activated. 
•  Make sure the ANT+ sensor is 

compatible with your Forerunner.

•  Bring the Forerunner within 3 m of the 

ANT+ sensor. 

•  Stay 10 m away from other ANT+ 

sensors while pairing.

•  If   is off, select MODE > Settings > 

run Settings > Heart rate > ANT+ 

Hr > Yes > restart Scan.

•  If   is off, select MODE > Settings 

> run Settings > Foot Pod > Yes > 

restart Scan.

•  If   is off, select MODE > Settings 

> Bike Settings > bike name > ANT+ 

Spd/Cad > Yes > restart Scan.

•  If   is off, select MODE > Settings 

> Bike Settings > bike name > 

ANT+Power > Yes > restart Scan.

•  If you still cannot pair the accessory, 

replace the accessory battery (see 

 or accessory instructions). 

When the accessory is paired, a message 

appears, and the accessory icon (

appears solid on the screen. 

NOTE: The Forerunner cannot record 

heart rate data while swimming.

NOTE: If you do not have a heart rate 

monitor, you can skip this task.
Wear the heart rate monitor directly on 

your skin, just below your breastplate. It 

should be snug enough to stay in place 

during your run.

Snap the heart rate monitor 

➊

 onto 

the strap.