Canon Wireless File Transmitter WFT-E6A 매뉴얼

17

A user name and password are required before the Wi-Fi Remote application (Wi-Fi-enabled 
device connected to the Wi-Fi network) can access the transmitter in order to operate the 
camcorder. Additionally, you can set a unique camcorder identification code and designate the 
port that Wi-Fi Remote should use. The Wi-Fi connection will be disabled while you change 
these settings.

[User Name]*, [Password]*  Protect the remote operation of the camcorder with a user name 

and password.

[Port No.]

The port number (HTTP protocol) used by Wi-Fi Remote. This is 
usually set to port 80, but you can change it if necessary.

[Camera ID]

Set a unique camcorder identification code that will appear on the 
Wi-Fi Remote screen. This is convenient if you are using a multi-
camera shooting setup.

* Required settings.

[w Other Functions] > [Wi-Fi Remote] > [Camera
Settings]

 

If necessary, repeat steps 2 and 3 to set additional 
settings. When you finish changing the settings, 
select [L], press SET and then close the menu.

 

When you close the menu after changing the 
camcorder’s settings, the camcorder will reconnect 
to the Wi-Fi network using the new settings.

1 Use the joystick or turn the SELECT dial to select a character and then press SET 

to add it.

 

Repeat this step as necessary to enter the necessary text.

2 After entering the desired text, select [OK] and then press SET.

1 Push the joystick up/down or turn the SELECT dial to select a value for the first 

field and then press SET to move to the next field. 

2 After completing all the fields, select [Set] and press SET to enter the port number.

COP

Y