Cambridge Audio Multi-room speaker system 사용자 설명서

12  Incognito multi-room

Connecting  aan  eexternal  aamplifier/active  ssubwoofer  tto
your ssystem

Should extra amplification power, or, an active subwoofer be required,

a line level pre-amp output is provided on the back of the KP10.

Using high-quality audio interconnect cable, an external power

amplifier may be connected to the KP10 pre-amp output screw

terminals. 

A fader function on the KP10 can be used to adjust the level

between the speakers connected to the KP10 and the external

amplifier/active subwoofer, so that the balance between the two

can be adjusted.

CCTV

A CCTV system may be connected to the Incognito Multi-Room system.

Connect the monitor/TV video signal output to the VH10 at the

CCTV IN socket located on the top surface of the unit allowing the

live video feed to be viewed in all connected zones.

If sound is also required, the audio signal output of the CCTV

system may be connected to the EXT/CCTV inputs on the AH10.

If the CCTV system is to be remote controlled connect an IR-1 infra-

red emitter to the ALL COMMANDS output on the AH10 and stick

the emitter over the IR receiver of the CCTV system. This will allow

the user to control the CCTV system from any room in the house.

ADVANCED SYSTEM OPTIONS

Active subwoofer or 
external amplifier

Twin screened

cable

Outlet with two
Phono/RCA sockets

CCTV hub

Video

Cat5

Audio 
(if available)

IR10

SS10