Cambridge Audio Multi-room speaker system 사용자 설명서

6 Incognito multi-room

PS10

SS10

Cat5

KP10

Cat5

SS10

AUDIO CONNECTIONS

PS10 ppower ssupply tto AAH10

For each AH10 with up to four main zones connected (and no sub-

zones) one PS10 is required.

Sub-zones require a separate PS10 power supply.

For each AH10 (with both main and sub-zones connected) two x

PS10 power supplies are required.

AH10 tto K

KP10

Using a single Cat-5e cable, connect each KP10 to the AH10 via an

RJ45 plug using the EIA/TIA 568A wiring standard (see below) at the

AH10, and an eight-way colour-coded connection at the keypad.

The Cat-5 connection from AH10 to KP10 should not exceed 30m/ 100 ft.

Sub-zones connections are made in the same way as main zone

connections but from the sub-zone sockets (see illustration on page 9).

KP10 tto S

SS10 oor oother lloudspeakers

Connect the KP10 to a pair of speakers with two runs of standard

high-quality speaker cable.

Connections for one AH10 with two main zones attached

4 – blue

5 – white /blue
6 – orange

7 – white /brown
8 – brown

3 – white /orange

2 – green

1 – white /green

Speaker cable