Wacom Bamboo - Capture 사용자 설명서

71

71

TROUBLESHOOTING TABLES

If you encounter problems with your Bamboo tablet or pen, see the following tables. Your problem may be 
described here, and you can try the solution offered. Check the tablet Read Me file for the latest information 
updates.

For additional information, visit the Wacom web site at http://www.wacom.com .

GENERAL PROBLEMS

The computer does not have 
an available USB port.

Check if there is an available USB port on a USB hub. If not available 
you will need to add a USB hub or USB card.

The tablet status LED does 
not illuminate.

Verify that your tablet USB cable is properly connected to an active 
USB port. If you are connecting to a USB hub, make sure the hub is 
connected to an active USB port and that the hub is active. 

If using Bamboo in wireless mode, see also 

The computer does not go to 
sleep.

When you are not using the pen, remove it from the tablet surface or 
the tablet will continue to send data, keeping the computer awake.

Note: Because some metallic or other conducting objects can also 

cause the tablet to send data, it is best to keep the tablet 
surface clear of all objects when not in use.

The screen cursor is very 
erratic or jumps around when 
using the tablet.

On rare occasions the tablet may receive interfering radio frequencies 
from a computer monitor or nearby AM radio station. If you notice 
interference from a monitor, try moving the tablet at least six (6) inches 
away from the monitor, or change the monitor refresh rate or monitor 
resolution.

The tablet is set for R

IGHT

 

H

ANDED

 (or L

EFT

 H

ANDED

), but 

at the log on screen the tablet 
seems to work upside down.

Reinstall the tablet driver software and change the default orientation of 
the tablet. See 

.