Wacom Bamboo - Capture 사용자 설명서

76

76

The tablet status LED does 
not illuminate after pressing 
the power button on the 
wireless module.

Try again. Then:

1. Verify the Wacom wireless receiver is properly connected to an 

active USB port. If connecting to a USB hub, make sure the hub is 
connected to an active USB port and that the hub is active.

2. Verify the Wacom wireless module is properly installed in the tablet. 

Press the power button to connect wirelessly.

3. If the tablet status LED still does not light, connect the USB cable 

between your tablet and computer. 

On the wireless module, check the battery status LED. Amber 
indicates the battery is charging. Green indicates the battery is fully 
charged. If the LED remains off, the battery may be defective. 
Replace the battery.

4. If both the tablet status and wireless module LEDs remain off, then 

contact the Wacom support staff for the area where your product 
was purchased. See 

.

When using the tablet, the 
screen cursor or pen strokes 
seem to lag or skip in some 
applications.

See 

 for tips on improving the 

connection.

The battery charging process 
seems to stop whenever the 
computer enters sleep mode.

As required, adjust your system power or energy saver settings so that 
the computer does not enter sleep mode while the tablet battery is 
charging.