Raritan Computer Paragon II 255-30-6000-00 사용자 설명서
Chapter 4: Operation - Administrator Functions
99
Video Display Adjustment for P2-EUST
The P2‐EUST and P2‐EUST/C have additional capabilities for allowing
adjustment of your video display. Specify skew levels for Automatic Gain
Control (AGC), Red (R), Green (G), and Blue (B) to improve video quality.
adjustment of your video display. Specify skew levels for Automatic Gain
Control (AGC), Red (R), Green (G), and Blue (B) to improve video quality.
After switching to a channel from P2‐EUST or P2‐EUST/C, press the hot
key twice quickly to activate the OSUI. The Selection menu will be
displayed with a RED arrow ( ) on the left side of the name of the server
you are accessing. Press the * (asterisk) key to view the skew delay
settings, which appear in the bar at the base of the menu. See Video Gain
Adjustment and Skew Compensation in P2‐EUST (on page 45) for
additional information.
key twice quickly to activate the OSUI. The Selection menu will be
displayed with a RED arrow ( ) on the left side of the name of the server
you are accessing. Press the * (asterisk) key to view the skew delay
settings, which appear in the bar at the base of the menu. See Video Gain
Adjustment and Skew Compensation in P2‐EUST (on page 45) for
additional information.
Use the numeric keypad for the following operations:
¾
To select the value to change (when selected, the value
appears in red):
• Press / (forward slash) to move cursor to the left.
• Press * (asterisk) to move curser to the right.
• Press * (asterisk) to move curser to the right.
¾
To change values:
• Press + (plus sign) to increase the value.
• Press ‐ (hyphen or minus sign) to decrease the value.
• Press ‐ (hyphen or minus sign) to decrease the value.
Once you have specified video values and the video quality is acceptable,
the values will be stored on your system until you change them again.
the values will be stored on your system until you change them again.