Raritan Computer Paragon II 255-30-6000-00 사용자 설명서
Chapter 3: Operation - User Functions
71
Note: This CIM must be set as the ACTIVATOR channel so please
note down its channel number.
note down its channel number.
2. Connect other P2CIM‐AUSB to the remaining video and USB ports of
the server. Make sure each CIM is connected to one USB port. If there
are not enough USB ports on the server, connect their USB connectors
to a USB hubʹs USB ports for power supply.
are not enough USB ports on the server, connect their USB connectors
to a USB hubʹs USB ports for power supply.
3. Connect these CIMs to the channel ports of the desired Paragon
switch using the Cat 5 cables.
Operation Rules
This section describes the general concept for operating the Multiple
Video function, including the activation and termination of the Multiple
Video mode.
Video function, including the activation and termination of the Multiple
Video mode.
Activation of the Multiple Video Mode
• Only access to the ACTIVATOR channel can trigger the function.
• The sequence of the ACTIVATOR and FOLLOWER user ports is
• The sequence of the ACTIVATOR and FOLLOWER user ports is
consecutive. For example, with the precondition of four associated
channels, if the ACTIVATOR user port is No. 3, the FOLLOWER user
ports start from the next number, which are 4, 5, and 6.
channels, if the ACTIVATOR user port is No. 3, the FOLLOWER user
ports start from the next number, which are 4, 5, and 6.
• The function is forced regardless of the login status or the
permissions of the logged‐in users on the FOLLOWER user stations.
• This function can be remotely triggered through Raritanʹs IP‐Reach
(if any).
Note: Accessing the ACTIVATOR channel with the Forced Video
command CANNOT trigger the Multiple Video function. The associated
channels will not output their data automatically.
command CANNOT trigger the Multiple Video function. The associated
channels will not output their data automatically.
Termination of the Multiple Video Mode
The hot key for triggering the OSUI is disabled on the FOLLOWER user
stations. Therefore, choose one method below to make the user station(s)
exit the Multiple Video mode.
stations. Therefore, choose one method below to make the user station(s)
exit the Multiple Video mode.
• On the ACTIVATOR user station, press the hot key (default: Scroll
Lock) twice quickly to trigger the OSUI, and do one of the following.
Both of the ACTIVATOR and FOLLOWER user stations will then exit
the mode.
Both of the ACTIVATOR and FOLLOWER user stations will then exit
the mode.
Press Shift+F9 to disconnect the ACTIVATOR channel
Press F9 to log out of the system
Choose another channel in the Selection Menu