Uniden BCD996T 사용자 매뉴얼

117

After you select an alert pattern, the scanner prompts for the alert level for a 
received alert. Level options 1 to 15 sets a fixed audio level independent of the 
main volume setting. AUTO uses the main volume setting for the alerts.

The scanner can check multiple tone combination pages for channels whose 
settings are the same. To achieve this, set the channel to the same frequency, 
modulation, and attenuation. For example, the scanner checks tone combinations 
for channel 1 to channel 3 for the following settings.

Although set to Auto, if the band default is anything other than FM or NFM, 
modulation will always be FM.

If you switch to Tone-Out Standby Mode for Multi-Channel Monitoring, the display 
switches every 2 seconds to show the frequency it is checking. However, it is, at 
the same time, checking all frequencies for Tones. If one is detected, it switches to 
Tone-Out Hold mode.

 to enable real time audio output from REC to an audio recording device.

 — the scanner outputs the signal to REC. Press 

F

 to select.

 — the scanner does not output any audio. Press 

F

 to select this option.

Ch 1

137.0000

Auto (NFM)

Off

1000.0

2000.0

Ch 2

137.0000

Auto (NFM)

Off

2200.0

3200.0

Ch 3

137.0000

Auto (NFM)

Off

1500.0

2500.0

Ch 4

137.0000

NFM

Off

1800.0

2800.0

Ch 5

137.0000

FM

Off

2000.0

3000.0

Ch 6

138.0000

Auto (NFM)

Off

1000.0

2000.0