Uniden BCD996T 사용자 매뉴얼

130

If you still cannot get satisfactory results while using your scanner or if you want 
additional information, please call or write the Uniden Parts and Service Division. 
The address and phone number are listed in the Warranty at the end of this 
manual. If you would like immediate assistance, please call Customer Service at 
(800) 297-1023.

If you have Internet access, you can visit 

 

http://www.uniden.com for additional information.

Scanner won’t acquire 
the data channel.

The squelch might need to be 
adjusted.

Adjust the squelch threshold. See 
“Turning On the Scanner and Setting the 
Squelch” on Page 45.

The frequency used for the 
data channel might be 
missing.

Check your frequency list for the data 
channel. 

Missing replies to 
conversations.

The scanner might need to be 
changed to a Type 1 scanner 
setup.

Change to a Type 1 scanner setup. See 
the programming instructions on the web 
at www.uniden.com/scanners.

The fleet map might be 
incorrect.

Try another preset fleet map or program 
your own fleet map.

One or more of the system’s 
frequencies might not be 
entered.

Make sure all the system’s frequencies 
have been entered.

The system you are trying to 
scan might be LTR or 
EDACS.

Set the scanner to scan LTR or EDACS 
systems. See the programming 
instructions on the web at 
www.uniden.com/scanners.