Uniden BTS200 사용자 설명서

18 - English

Your BTS200 comes equipped with a rechargeable Lithium-Ion polymer battery. You can 

recharge the battery by connecting it to 120 VAC power through the AC adapter.

See page 5 for details on installing and charging the battery (the same procedures as for 

initial turnup).

1.  Press down on the battery latch to release the battery. 
2.  With the battery latch pressed down, press down and push out the opposite end of the 

battery to slide it out of the battery compartment.

Press the battery indicator button while the AC adapter is not connected to your speaker 

(see page 8). The battery LEDs light according to how much power remains in the battery:

 • 3 LEDs = 100 - 70% remaining
 • 2 LEDs =    70 - 35% remaining
 • 1 LED   =    35 - 15% remaining