Uniden Digital Depth Sounder QT-206 사용자 설명서
INSTALLING THE QT-206
1.
Find a location on your dash panel which will provide clear viewing
and access to the LCD window.
and access to the LCD window.
2.
After finding the right location for the indicator unit, mark a 2-inch
hole to be cut out.
hole to be cut out.
3.
Check behind the panel for any cables or wiring which could be
damaged. Then cut out the 2-inch hole.
damaged. Then cut out the 2-inch hole.
4.
Test fit the unit in the hole, and make any adjustments with your
saw or drill.
saw or drill.
5.
Extending out of the back of the instrument is a brass shaft. Attach
the U-shaped mounting bracket over this shaft, and place the
washer on the shaft. Thread the nut onto the shaft until the
U-shaped bracket is firmly against the back of the dash panel.
the U-shaped mounting bracket over this shaft, and place the
washer on the shaft. Thread the nut onto the shaft until the
U-shaped bracket is firmly against the back of the dash panel.
6.
Look at the front of the instrument to ensure that it is aligned
properly. Then tighten securely.
properly. Then tighten securely.
3
BRASS STUD
P/N: 210-005
WASHER
P/N: 308-029
NUT
P/N: 3203-009
P/N: 3203-009
2 3/8"
2 1/2"
2"
1/2"
MOUNTING BRACKET
P/N: 950-025
More
Less
Shallow
Sensitivity
Power
Alarm
X-ducer
Red
Black
Shield
+