Siemens Two-Way Radio SIMATIC PCS 7 사용자 설명서
Introduction
4
Plant Asset Management as a maintenance task
General information
Various tasks have to be handled during the operating phase
of a plant, for which different groups of persons are responsib-
le.
of a plant, for which different groups of persons are responsib-
le.
The production personnel operate and monitor the plant, and
make sure that the desired products are produced with the ap-
propriate quality, in the defined quantity, at a specified time,
and with minimum resources with respect to personnel, raw
materials, energy, costs, etc.
make sure that the desired products are produced with the ap-
propriate quality, in the defined quantity, at a specified time,
and with minimum resources with respect to personnel, raw
materials, energy, costs, etc.
Maintenance staff must
• ensure a high availability of the plant,
• ensure this availability in the long term by implementing
• ensure this availability in the long term by implementing
optimization measures, and
• carry out maintenance measures with minimum use of per-
sonnel, material, energy, costs, etc.
As a result of their different tasks, these two groups of persons
have different information requirements.
have different information requirements.
Different demand for information at the plant
Plant operator
Information on the process such as:
• Recipe parameters
• Temperature characteristic
• Pressure values
• Raw material stocks
• Output
• Recipe parameters
• Temperature characteristic
• Pressure values
• Raw material stocks
• Output
Maintenance personnel
Information on the state of the production equipment such as:
• Components OK
• Maintenance required
• Failure
• Functional check
• Components OK
• Maintenance required
• Failure
• Functional check
Information on the measured process tags is available for the
plant operator. Apart from the measured value itself and its
status, this may, for example, be the information on whether
the measured value is still valid.
plant operator. Apart from the measured value itself and its
status, this may, for example, be the information on whether
the measured value is still valid.
The focus of interest for the maintenance engineer is the sta-
tus of the production equipment that is reflected in the states
of the devices and components used (i.e. particularly in the
states of the field devices). Typical states in this respect inclu-
de "Component OK", "Maintenance required", "Failure" or
"Function check".
tus of the production equipment that is reflected in the states
of the devices and components used (i.e. particularly in the
states of the field devices). Typical states in this respect inclu-
de "Component OK", "Maintenance required", "Failure" or
"Function check".
SIMATIC PCS 7 allows a clear classification of the information
for the user groups Plant Operators and Maintenance Engi-
neers.
for the user groups Plant Operators and Maintenance Engi-
neers.
Maintenance_PA_04_2010_en.book Seite 4 Dienstag, 6. September 2011 9:45 09
© Siemens AG 2011