Xerox FIB1-SERIAL 전단

CISPR PUB.22 Class A COMPLIANCE:

This device complies with EMC directive of the European Community and meets or exceeds the following 

technical standard. EN 55022 - Limits and Methods of Measurement of Radio Interference Characteristics of 

Information Technology Equipment. This device complies with CISPR Class A.

WARNING:

This is a Class A product. In a domestic environment this product may cause radio interference in which case the 

user may be required to take adequate measures.

CE NOTICE

Marking by the symbol CE indicates compliance of this equipment to the EMC directive of the European 

Community. Such marking is indicative that this equipment meets or exceeds the following technical standards: EN 

55022:1994/A1:1995/A2:1997 Class A and EN61000-3-2:1995, EN61000-3-3:1995 and 

EN50082-1:1997

WARNING:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when 

the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio 

frequency energy and if not installed and used in accordance with the instruction manual may cause harmful 

interference in which case the user will be required to correct the interference at his own expense. NOTICE: (1) The 

changes or modifications not expressively approved by the party responsible for compliance could void the user's 

authority to operate the equipment. (2) Shielded interface cables and AC power cord, if any, must be used in order to 

comply with the emission limits.

TRADEMARKS
Ethernet is a registered trademark of Xerox Corp.
ST

®

is a registered trademark of AT&T.

Temperature :  0℃ - 50℃(operating)

-20℃- 70℃ (storage)

Humidity         10-90% non condensing 

138mm x 86mm x 20mm 
(H x W x D)

300g

+12V / 1A maximum
DC plug type : center Positive

7

2

5

3

8

2

9

DB9 

Female 

3

4

1

5

6

PIN 

NO #

FIB1-SERIAL Pin Assignment 
(DB9 Connector for Option)

Two connectors are provided for fiber optic cable connection. 
One is for transmission and the other is for reception of optical data. (WDM transceiver has only on SC 
connector for bi-directional transmissions on a single fiber)