Streamlight StreamLight Battery Charger 48-59-0192 사용자 설명서

다운로드
페이지 12
Page 5
Keep your battery pack and charger in good repair by adopting a regular
maintenance  program.  After  six  months  to  one  year,  depending  on  use,
return the battery pack and charger to a MILWAUKEE service facility for:
•
Electrical inspection
•
Testing to assure proper mechanical and electrical
operation
Maintaining  Battery  Pack
MILWAUKEE Nickel-Cadmium and Nickel-Metal Hydride battery packs will
operate  for  many  years  and/or  hundreds  of  cycles  when  they  are
maintained and used according to these instructions.
A battery pack that is stored for six months without being used will discharge
itself. Batteries discharge at a rate of about 1% per day. Charge the battery
every six months even if it is unused to maximize battery life. Do not tape
the tool's trigger in the ON position and leave the tool unattended as this may
discharge the battery to a point where it will no longer be able to recharge.
Use a MILWAUKEE battery pack only until it no longer performs with the
power  and  torque  needed  for  your  application.
Store  your  battery  pack  in  a  cool,  dry  place.  Do  not  store  it  where  the
temperature may exceed 120°F (50°C) such as in a vehicle or metal building
during  the  summer.  High  temperatures  will  overheat  the  battery  pack,
reducing battery life. If it is stored for several months, the battery pack will
gradually lose its charge. One to three cycles of charging and discharging
through normal use will restore the capacity of the battery pack. During the
life  of  the  battery  pack,  the  operating  time  between  charges  becomes
shorter. If the operating time becomes extremely short after a proper charge,
the  usable  life  of  the  battery  pack  has  been  reached  and  it  should  be
replaced.
MAINTENANCE
To  reduce  the  risk  of  injury  and  damage,  never  immerse  your
tool,  battery  pack  or  charger  in  liquid  or  allow  a  liquid  to  flow
inside  them.
WARNING!
RBRC  Battery  Recycling  Seals
The RBRC™ Battery Recycling Seals on your tool battery packs indicate that
MILWAUKEE has arranged for the recycling of that battery pack with the
Rechargeable Battery Recycling Corporation (RBRC). At the end of your
battery pack’s useful life, return the battery pack to a MILWAUKEE Branch
Office/Service  Center  or  the  participating  retailer  nearest  you.  For  more
information,  visit  the  RBRC  web  site  at  www.rbrc.org.
Disposing  of  Nickel-Cadmium  Battery  Packs
Nickel-Cadmium battery packs are recyclable. Under various state and local
laws, it may be illegal to dispose of this battery into the municipal waste
stream.  Return the battery pack to the nearest MILWAUKEE Branch Office/
Service Center or dispose of your battery pack according to federal, state
and local regulations.
Repairs
For repairs, return the tool, battery pack and charger to the nearest service
center.
Battery  Pack  Warranty
Battery packs for cordless tools are warranted for one year from the date
of  purchase.
Cleaning
Clean dust and debris from charger and tool vents. Keep tool handles clean,
dry and free of oil or grease. Use only mild soap and a damp cloth to clean
the  tool,  battery  pack  and  charger  since  certain  cleaning  agents  and
solvents are harmful to plastics and other insulated parts. Some of these
include  gasoline,  turpentine,  lacquer  thinner,  paint  thinner,  chlorinated
cleaning solvents, ammonia and household detergents containing ammonia.
Never use flammable or combustible solvents around tools.
WARNING!
To reduce the risk of explosion, never burn a battery pack even
if  it  is  damaged,  dead  or  completely  discharged.
To  reduce  the  risk  of  injury,  always  unplug  the  charger  and
remove  the  battery  pack  from  the  charger  or  tool  before
performing  any  maintenance.  Never  disassemble  the  tool,
battery  pack  or  charger.  Contact  a  MILWAUKEE  service
facility  for  ALL  repairs.
WARNING!
FIVE YEAR TOOL LIMITED WARRANTY
Every  MILWAUKEE  tool  is  tested  before  leaving  the  factory  and  is
warranted  to  be  free  from  defects  in  material  and  workmanship.
MILWAUKEE will repair or replace (at MILWAUKEE’s discretion), without
charge, any tool (including battery chargers) which examination proves to
be defective in material or workmanship from five (5) years after the date
of purchase. Return the tool and a copy of the purchase receipt or other
proof of purchase to a MILWAUKEE Factory Service/Sales Support Branch
location or MILWAUKEE Authorized Service Station, freight prepaid and
insured.  This  warranty  does  not  cover  damage  from  repairs  made  or
attempted by other than MILWAUKEE authorized personnel, abuse, normal
wear and tear, lack of maintenance, or accidents.
Battery Packs, Flashlights, and Radios are warranted for one (1) year from
the  date  of  purchase.
THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE
EXCLUSIVE. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS
OF PROFITS.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRAN-
TIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR
MERCHANTABLILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE.
This warranty gives you specific legal rights. You may also have other rights
that vary from state to state and province to province. In those states that
do not allow the exclusion of implied warranties or limitation of incidental or
consequential damages, the above limitations or exclusions may not apply
to you. This warranty applies to the United States, Canada, and Mexico only.