SINGER 30215 지침 매뉴얼

다운로드
페이지 31
2 & 5 Stitch Pattern 
Machines
 
PERFORMANCE CHECKLIST
 
When sewing difficulties occur look back through this 
manual to make sure you are correctly following the 
instructions. If you still have a problem, the reminders 
below may help you to correct it.
 
NEEDLE DOES NOT MOVE 
Is machine connected to electrical supply? 
Is the power and light switch on? 
Is controller connected?
 
NEEDLE MOVES BUT STITCH IS NOT FORMED 
Is needle defective? 
Is needle fully inserted into needle clamp? 
Are bobbin and needle correctly threaded? 
Is bobbin case correctly inserted into shuttle race 
area?
 
NEEDLE BREAKS 
Is needle straight and sharp? 
Is needle correct size? 
Is needle fully inserted into needle clamp? 
Are controls properly set? 
Are accessories correct for application?
 
BOBBIN WINDING DIFFICULTIES 
Is thread unwinding freely from spool? 
Is bobbin winder engaged? 
Is thread end securely held at start of wind?
 
UPPER THREAD BREAKS 
Is machine properly threaded? 
Is thread freely unwinding from spool? Is needle
correct size for thread? 
Is upper thread tension too tight? 
Is bobbin case properly inserted? 
Is bobbin rim free of nicks?
 
LOWER THREAD BREAKS 
Is bobbin correctly wound? 
Is bobbin correctly inserted into bobbin case? 
Is bobbin case correctly threaded?
 
SKIPPED STITCHES 
Is machine properly threaded? 
Is fabric firmly held down? 
Is needle correct style and size? 
Is needle straight and sharp?
 
FABRIC DOES NOT MOVE PROPERLY UNDER 
PRESSER FOOT 
Is presser foot correctly attached to machine? 
Is presser foot lowered? 
Is stitch length correctly set?
 
31