Brother HS-3000 빠른 설정 가이드
1
2
3
Case A
1
Fabric
2
Iron on the stabilizer material. (If you do not
wish to use an iron, attach the stabilizer
material with a basting stitch.)
wish to use an iron, attach the stabilizer
material with a basting stitch.)
3
Stabilizer
2
1
Case B
1
Fabric
2
Stabilizer
1
2
Case C
1
Ribbon (Secure with double-sided tape.)
2
Stabilizer
Note
Temporary spray-on adhesive can also be used
to secure unusually shaped objects. If adhesive is
used, some glue may get on the presser foot,
needle and needle plate. After finishing
embroidering the appliqué pattern, clean away
the glue.
Temporary spray-on adhesive can also be used
to secure unusually shaped objects. If adhesive is
used, some glue may get on the presser foot,
needle and needle plate. After finishing
embroidering the appliqué pattern, clean away
the glue.
Embroidering onto small pieces of fabric or in corners
Use stabilizer material to provide extra support while embroidering. After embroidering is completed,
carefully remove the stabilizer material. Use stabilizer material which is specially designed for
embroidering.
carefully remove the stabilizer material. Use stabilizer material which is specially designed for
embroidering.
121