Brother HS-3000 빠른 설정 가이드

14

1. Press the needle position button to raise the needle, and

then turn off the sewing machine.

2. Raise the presser foot lever.

1

3. Press the black button located at the back of the presser

foot holder to release the foot.

1

Presser foot holder

1

2

4. Place the other presser foot below the holder so that the

presser foot pin is aligned with the slit in the holder.

5. Lower the presser foot lever so that the presser foot pin

snaps into the notch in the presser foot holder.

1

Notch in presser foot holder

2

Presser foot pin

It may be necessary to change the presser foot depending on the stitch that is selected.