Brother HS-3000 빠른 설정 가이드
41
Sewing thick fabric
1. Raise the presser foot lever, and then raise it even higher so
thicker fabrics can be placed under the presser foot.
5
Sewing a curve with a zigzag stitch
Select a short stitch length in order to obtain a fine stitch and
sew slowly while keeping the seam parallel with the fabric edge
as you guide the fabric around the curve.
Select a short stitch length in order to obtain a fine stitch and
sew slowly while keeping the seam parallel with the fabric edge
as you guide the fabric around the curve.
Note
For sharp corners, temporarily stop sewing while keeping the
needle in the material, raise the presser foot lever, and then
carefully turn the fabric while keeping the fabric edge aligned
with the side of the presser foot. Lower the presser foot lever
and continue sewing.
For sharp corners, temporarily stop sewing while keeping the
needle in the material, raise the presser foot lever, and then
carefully turn the fabric while keeping the fabric edge aligned
with the side of the presser foot. Lower the presser foot lever
and continue sewing.
Sewing thin fabric
5
Place thin paper or stabilizer material under the fabric before
sewing.
sewing.
2. If the fabric does not feed at the beginning of sewing, place
a piece of folded fabric or cardboard under the back of the
presser foot to raise it.
presser foot to raise it.