Brother HS-3000 빠른 설정 가이드

51

1. Attach presser foot J and lower the presser foot lever.

2. Press the reverse/reinforcement button to sew

reinforcement stitches at the beginning of the basting.

Note
–

If you will not sew reinforcement stitches, raise the presser
foot lever, hold the end of the upper thread, and then turn
the balance wheel toward you with your right hand to pull up
the bobbin thread. Pull about 2" (5.0 cm) of both the upper
and lower threads out toward the rear of the machine.

–

The length of one stitch can be set between 13/64" and 1-
3/16" (5.0 and 30.0 mm).

1

Between 13/64" and 1-3/16" (5.0 and 30.0 mm)

3. Sew while keeping the fabric pulled tight.

4. End the basting with reinforcement stitches.

1

1

1

J