PVI Industries PV 6113b 전단

다운로드
페이지 2
PV 6113b 6/03 
SPECIFICATION FOR DOMESTIC WATER HEATERS 
Power Combustion, Oil-Fired Water Heaters with Polymer-Lined Storage Tanks 
(continued) 
 
 
 
 
Safety Controls 
 
 
As a minimum, the heater will be equipped with the following: 
•  electronic flame monitoring with pre-purge (140,000 to 399,000 Btu/h burners) or electronic flame safeguard 
with pre-purge and flame status indicating lights (600,000 to 3,200,000 Btu/h burners)  
• two 
immersion operating thermostats 
• an immersion temperature limiting device 
• 
an ASME- or AGA-rated temperature and pressure relief valve 
• 
and options as selected on form PV 6006 
 
 
Warranty Summary 
 
 
 
 
Storage tank:  
 
_____ year (5 standard, 15 optional)  Covers manufacturing or material defects,  
 
 
 
 
 
leaks and /or the production of rusty water. Tank coverage will include failure due 
 
 
 
 
 
to scale buildup for ____  full years (3 standard, 6 optional) and ____ prorated years 
 
 
 
 
 
(2 standard, 9 optional) with no provision or condition for maintenance or  
 
 
 
 
 
inspections and no limitations on water chemistry.  
 
 Heat 
exchanger 
 
and combustion chamber:    
5 year. Covers manufacturing or material defects, leaks, and/or the  
 
 
 
   production 
of 
rusty 
water. 
 
 
 
 
Burner and all heater parts:   
1 year 
 
 
The heater will have a _____ first year or ____ long-life service policy, which will cover replacement labor and freight 
costs under certain conditions.  Initiation and /or continuation of warranty coverage will not be dependent upon annual 
inspections, regular replacement of anode rods, or water chemistry.  Complete copies of all warranties and service 
policies, including all exclusions and conditions, will be presented to the owner as part of the submittal package.  These 
summaries are not warranties.  Consult warranty and policies for full details.  
 
 
Finishing 
 
 
The storage and heating sections will be completely factory packaged, requiring only job site hookup to utilities, 
venting, and plumbing.  The heater will be insulated, jacketed with enameled steel panels, and mounted on heavy-duty 
channel skids.  The heater will fit properly in the space provided and installation will conform to all local, state, and 
national codes. 
 
 
Start Up 
 
 
Start up on the unit will be performed by factory trained and authorized personnel.  A copy of the start up report will 
be provided to the owner. 
 
 
Quality Certification and Safety Standards 
 
 
The heater will be have an independent test laboratory listing to safety standard  UL732.  The water heaters will be 
manufactured by a company that has achieved certification to the ISO 9001 International Quality System.