PrintWorks Printer 전단

NOTE: Only one software download per email address.  Your 

email address and this passcode entered in the online product 

registration will allow you secure access to the software 

download.  Go to www.myprintworks.com/downloads

1. Handle the Portrait Studio Collection Watercolor Photo Paper on 

the edges to avoid fingerprints.

2. For best results, test your image printed on regular paper.  You

may notice minor color shifts from paper to Watercolor Photo 
Paper depending on the porosity and quality of your test sheet. 
See Printing Your Project section.

3. Portrait Studio Collection Watercolor Photo Paper is heavier and

thicker than regular photo paper.  For best results, use single 
sheet feeding.  It may be necessary to hand feed to ensure that 
the printer starts the feed process properly.  Do not force 
Watercolor Photo Paper through printer.

4. Drying time will depend on the inks used, the amount of ink 

applied and environmental conditions such as humidity.  Allow 
prints to thoroughly dry before stacking or handling.

5. The raised textured side of the Watercolor Photo Paper is the 

coated side.  Be sure to only print on this side.

6. Store packaged paper flat and in a cool, dry place.  Be sure 

edges are flat before feeding into printer.

7. Only use an inkjet printer.  Do not use a laser printer with this 

paper.

The Software Quick Start Guide on the reverse will get you started.  If 
you need help, refer to the Help menu within the program.  It is located 
in the top right corner of the software window/page.

Portrait Studio Collection photo media has been developed for framing.  
Remember, there are no rules.  Decide where the framed image will be 
hung and choose materials: mat, glass and spacers (to fit between the 
glass and print) with archival qualities to increase image permanence.

Lay the print over the frame backer to ensure a flat, even assembly.  
Select a mat, if desired that highlights the frame and overall image.  Use 
a frame without glass for a gallery-quality, non-glare, watercolor look.  Or 
use glass to help protect the image from dust and harmful UV rays.

Included in your Portrait Studio Collection package are two sheets of 
matte photo paper to check your transformed image, printer settings and 
size and location of image before you print on the Watercolor Photo 
Paper.  This test paper is printable on both sides.  To conserve your 
printer ink, you can set the print quality to fast or draft mode.  Image 
quality will not be as good when printed in this mode so remember to 
change the setting back to the recommended one.

Load Media – Load a single sheet of Watercolor Photo Paper into your 
printer according to your printer type.  Your image is to be printed on the 
raised textured, coated side:

Printworks Portrait Studio Collection Watercolor Photo Paper is 
made to exacting standards with archival quality materials.  You can 
expect brilliant colors and intense gradations in color when using this 
paper.  Because many inkjet printers use water-based dyes and 
depending on environmental conditions, the print may fade over 
time.  For more permanent protection of the printed image from 
temperature, humidity, poor air quality, ultraviolet light and for best 
overall results, finish your print with a non-yellowing, UV spray 
lacquer that is solvent-based and readily available at art, craft and 
photographic supply retailers.  Avoid sprays that are latex based.

* To prolong the life of any print, it is recommended to seal the back 
of the print with a solvent-based lacquer to protect from humidity, 
moisture and mold.  Many watercolor prints will be displayed without 
glass or mat boards, however, when they are used, ensure that only 
archival quality materials for mats and backings are used.

For printer brands not shown here, refer to your printer’s operating manual for instructions 
on specialty photo paper settings.

Go to www.myprintworks.com/downloads to download your free 
copy of the ArcSoft® MediaImpression for Printworks Portrait Studio 
Collection software.  Note that there is one download per email 
address.  You must submit your passcode listed on the top of this 
page to gain access. 

Load paper with raised textured

side facing out

Load paper with raised textured

side facing down

Printer Settings – Printworks Portrait Studio Collection Watercolor Photo 
Paper is compatible with all color inkjet printers.  Select your printer’s 
settings from the chart below:

P/N 51988, 1/08

Paris Business Products, Inc.   

Westampton, New Jersey, USA 

www.myprintworks.com

1. Select digital images with high resolutions.  Most digital cameras 

today take images that can be printed on 8.5” x 11” paper as long 
as the camera settings for the original image are high quality, saved 
in this software in high quality and printed on high quality settings. 
Leave the Quality slider setting between 90 and 100 when saving 
the image in ArcSoft MediaImpression for Printworks Portrait Studio 
Collection software.

2. Select images with vibrant color, sharp detail and contrast.  Many of 

the artistic effects transform images with blocks of color but with a 
lot of tonality to mimic a painterly effect.

3. The supplied test sheets – printable on both sides - will limit any 

errors with sizing or layout; test often in the designing/editing 
process to ensure the desired results. If you use all of the supplied 
sheets, substitute with regular photo paper or inkjet paper.  

4. The Help screen should address any software functionality 

questions that you may have when editing, designing or printing 
your images.  The Help button is in the top right corner in the 
software and can be referenced during use.

©2008, Paris Business Products, Inc.

HP

HP Premium Photo Paper

Best

Canon

Matte Photo Paper

High

Auto Color Adjustment

Epson

Premium Presentation Paper 
Matte

Best

PhotoEnhance

Kodak

Auto Select

Best

Lexmark

Photo Glossy

Best