Pelonis EPSON STYLUS COLOR PRINTER 400 사용자 설명서
1/2/97 10:34am (Right) hw_pig.fm5
EPSON Stylus COLOR 400
1/97
EPSON Stylus COLOR 400 - 9
7. Lower the ink cartridge into its holder with the label facing
up and the arrow pointing to the back of the printer. The
color cartridge goes on the right and the black cartridge goes
on the left.
color cartridge goes on the right and the black cartridge goes
on the left.
8. Press down the ink cartridge clamp until it locks in place.
Caution:
Don’t open the clamp or remove a cartridge except to
replace it with a new one. Once you remove a
cartridge, you can’t reuse it, even if it contains ink.
Don’t open the clamp or remove a cartridge except to
replace it with a new one. Once you remove a
cartridge, you can’t reuse it, even if it contains ink.
9. Press the
R
cleaning (or
E
load/eject) button to begin
charging. (Even if you don’t press a button, ink charging
begins 60 seconds after you close the clamp.)
begins 60 seconds after you close the clamp.)
10.The
P
power light continues to flash while the ink charges.
When charging is finished, the
P
power light stops flashing
and the print heads move to the far right position. Close the
printer cover and resume printing.
printer cover and resume printing.
Caution:
Never turn off the printer while the
Never turn off the printer while the
P
power light is
flashing.
Loading Plain Paper
Always load paper or other media with the printable side
facing up. Look for an arrow on the paper packaging to
indicate the printable side.
facing up. Look for an arrow on the paper packaging to
indicate the printable side.
1. Lower the output tray and slide out the extension. Then
slide the left edge guide all the way left.
To load long paper, pull out the paper support extension and
both output tray extensions.
both output tray extensions.
To print on transparencies, remove the paper support and
reinstall it in the rear paper support slot.
reinstall it in the rear paper support slot.